Installation of Boost Box Transmitter Control Cable

The Boost Box IR transmitter cable is self-adhesive and is designed to attach directly to the
face of the stereo.  Attach the transmitter cable directly over the IR receiver window on the
face of the stereo.  The recommended install is to then route the thin control cable back
through the hole where the stereo is mounted (as pictured below).

Wireless IR remote controls will still work after the Boost Box installation.  The Boost Box
control cable transmitter is translucent, and IR remotes can transmit through it.  Feel free to
call us for installation recommendations or tips.
Watersport Innovations    PO Box 772, LaFollette TN 37766    (423) 449-9408
Copyright 2014 Watersport Innovations.  All rights reserved.